Siemens SIMOVERT MASTERDRIVES MC Series - Activating Clock Cycle Synchronization; Specifying the DP Cycle; Technology CPU

Commissioning
4.3 Creating a STEP 7 project
Connecting SIMOVERT MASTERDRIVES MC to the Technology-CPU
Product Information, 03/2008, A5E00272072-05
21
● Under the Isochronous operation tab, activate the setting Synchronize drive to equidistant
DP cycle:
Figure 4-8 Activating clock cycle synchronization
Specifying the DP cycle
The DP cycle must be set in the Technology CPU and in the MASTERDRIVES MC.
Technology CPU
In the Technology CPU, the pulse frequency is set - just the same as at MASTERDRIVES
MC (determines the DP cycle) - and aligned to the DP cycle.