8.5 Response times after selection
8.5.1 General information
The response times depend on the following conditions:
● Safety function setting
– Basic function
– Extended function
● PROFIBUS or PROFINET
● Selection via the fail-safe digital input or PROFIsafe.
The "worst case values" in the following tables mean the following:
Worst case for a fault-free inverter: The response time is less than or equal to the specified
value.
Worst case for an inverter fault: The response time is less than or equal to the specified
value. The response time is applicable for fault causes
within the inverter itself, e.g. for a defective microproces‐
sor.
System properties
8.5 Response times after selection
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD 373
To Next Page
Loading...
