Siemens SINAMICS PERFECT HARMONY GH180 - Page 102

Non-customer replaceable parts include:
• Input Current Transformers
• Input Voltage Attenuation Board
• Output Voltage Attenuation Board
Note
Refer to Speci󹪝c System Schematics
Refer to the system outline and system schematic drawings, series A and B respectively for
your speci󹪝c drive. These drawings are contained in the O&M package supplied with the
drive.
Note
Customer Documentation Package
• For spare parts lists, refer to the custom documentation package shipped with the drive
or call Siemens technical support (1-800-333-7421). Refer to Appendix of this manual
entitled "Service and Support" for contact information.
• When calling for spare part information, please have your sales order number and drive
part number readily available.
NOTICE
Component Replacement
Unless otherwise indicated by Siemens, always replace components with the same part
number and revision level or newer.
Failure to comply with the above may cause the drive to function in an undesired and
unexpected manner.
See also
Service and Support (Page 103)
Spare Parts
11.1 Replaceable Spare Parts
Type 6SR5 Air-Cooled
100 Operating Instructions, AK, A5E39390112