B.9 Output Filter
When the VFD requires an output lter, the drive output is equipped with an output inductor and
capacitor lter. These components cannot be packaged into the core conguration due to space
limitations; therefore, they are housed in transition cabinets.
The lter components are sized based upon the continuous current rating of the power cells and
maximum voltage available (without over-modulation) of the drive
Please consult Siemens Engineering for the VFD output lter sizing, electrical and mechanical
interfacing details to the VFD.
Technical Data
B.9 Output Filter
Type 6SR5 Air-Cooled
Operating Instructions, AK, A5E39390112 115
To Next Page
Loading...
