7. Secure to the oor. If access to rear cabinet mounting bolts is limited, top angles can be used.
Refer to section "Proper Cabinet Anchoring Methods".
8. Reinstall the VFD blowers on top of the cabinets using the Cell/ Blower lift and make all
electrical connections.
Figure 6-2 Combining Several Shipping Splits (Transport Units)
NOTICE
No Transportation with Crane or Fork-lift Truck after Connecting Units Together
Specify the place of installation of the converter discreetly prior to installing the transport
units.
Once the transport units have been connected together, it is no longer permitted to
transport them by crane or fork-lift truck.
NOTICE
Connecting the Shipping Splits
Follow the interconnection drawing and instructions provided with the SINAMICS Perfect
Harmony GH180 drive. Required hardware and assembly material will be provided for
mechanical interconnections. Electrical interconnections will also be identied on the
interconnection drawing. All electrical connections can be made by front access only.
Assembly
6.3 Combining Several Shipping Splits
Type 6SR5 Air-Cooled
36 Operating Instructions, AK, A5E39390112
To Next Page
Loading...
