Figure 10-28 Torque Connections for 340-430A 4Q Power Cells
WARNING
Siemens strongly recommends that only qualied personnel be allowed to perform
maintenance and replacements on SINAMICS GH180 Perfect Harmony™ drives.
Failure to comply with recommendation:
• will invalidate any warranty claims should the drive not perform as designed or parts
become damaged
• may result in serious injury to personnel, which will be the sole responsibility of the
customer
See also
Removing the Power Cell Procedure (Page 81)
General Mounting (Page 33)
Maintenance
10.7 Remove and Replace
Type 6SR5 Air-Cooled
94 Operating Instructions, AK, A5E39390112
To Next Page
Loading...
