Configuring I/O
7
7.1 Inserting ADI4 module (840 sl)
Procedure
In order to insert an ADI4 module into the project via the hardware catalog, proceed as
follows:
1. In the hardware catalog, navigate to the folder "Distributed I/O > Drive Interfaces > ADI4"
and select the ADI4 module.
2. Use
drag-and-drop to move the ADI4 module from the hardware catalog and place it in the
network view.
SINUMERIK STEP 7 Toolbox V15.1
Configuration Manual, 12/2018, A5E46279635B AA 147
To Next Page
Loading...
