Siemens SINUMERIK 840D sl Configuration Manual

2.3 Installation notes
Software requirements
SINUMERIK STEP 7 Toolbox V15.1 is a TIA Portal options package, which requires the
following products to be installed:
● SIMATIC STEP 7 Professional V15.1
To use the SINUMERIK Safety Integrated plus safety concept, you also need the following
TIA Portal options package:
● SIMATIC Safety V15.1
Hardware requirements and other system requirements
All the hardware and system requirements of SIMATIC STEP 7 Professional V15.1 and, if
applicable, SIMATIC Safety V15.1 apply.
You can find the system requirements of STEP 7 Professional in the following documentation:
● STEP 7 Professional System Manual (
https://support.industry.siemens.com/cs/products?
search=STEP%207%20Professional&dtp=Manual)
● TIA Portal online help, search term "System requirements STEP 7 Professional"
Installation
Before installing, exit all of the applications (e.g. TIA Portal) and execute the "Start.exe" setup
file in the master directory of the product DVD.
Uninstallation
Via the installation wizard of the TIA Portal, you can uninstall the software, which is entered in
the Windows dialog "Uninstall or change program":
"Control Panel > Programs > Uninstall Program > Siemens Totally Integrated Automation
Portal V15.1"
Note
NC VAR selector must be uninstalled separately.
Product information
2.3 Installation notes
SINUMERIK STEP 7 Toolbox V15.1
Configuration Manual, 12/2018, A5E46279635B AA 23

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based