10.2 Representation of safety-related resources in the TIA Portal
Overview
Yellow markings identify all safety-related resources in the views of the TIA Portal:
●
Network view, device view, topology view
● Project tree
● Hardware catalog
● Inspector window
This also applies to the SINUMERIK components:
● NCU
Because the PLC and SINAMICS Integrated Safety subcomponents support integrated
functions, the higher-level NCU is marked as safety-oriented resource.
● Integrated PLC
● Integrated SINAMICS Integrated
● NX
Safety configuration
10.2 Representation of safety-related resources in the TIA Portal
SINUMERIK STEP 7 Toolbox V15.1
172 Configuration Manual, 12/2018, A5E46279635B AA
To Next Page
Loading...
