Siemens SINUMERIK 840D sl Configuration Manual

4.7 Copying blocks from one project into another
Procedure
Proceed as follows to import blocks from an existing project:
1. From the "View" menu, choose the command "Reference projects".
The "Reference projects" palette is displayed under the project tree.
2. Click the "Open reference project" icon in the "Reference projects" palette, select the
project, and confirm with "Open".
The
project is opened (write-protected) and the associated project structure is displayed in
the "Reference projects" palette.
Programming the PLC
4.7 Copying blocks from one project into another
SINUMERIK STEP 7 Toolbox V15.1
Configuration Manual, 12/2018, A5E46279635B AA 79

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based