Siemens SINUMERIK 840D sl Configuration Manual

2.4 Limitations for use
According to the state of the art, it can admittedly not be excluded - given the complexity of the
software products - that sporadic functional restrictions can occur under the greatly differing
system and application conditions.
In this context, please observe the current boundary conditions, functional restrictions and
workarounds on the Internet:
Boundary conditions in Siemens Industry Online Support (https://
support.industry.siemens.com/cs/document/109751810)
Product information
2.4 Limitations for use
SINUMERIK STEP 7 Toolbox V15.1
24 Configuration Manual, 12/2018, A5E46279635B AA

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based