Siemens SINUMERIK 840D sl Configuration Manual

3. Select the file formats which you would like to import in the "File type" drop-down list.
–
TS and CSV files
– TS files: Importing of DB2 alarm texts that were copied directly from the NCU.
– CSV file: Importing of DB2 alarm texts that were converted beforehand into the CSV
format, for example with AMM /P2P.
4. Check the checkboxes of the desired files individually or activate the higher-level
checkboxes to import all of the displayed files.
5. Confirm the selection with "Import".
Result
The SINUMERIK user alarm texts have been imported.
Only the alarm texts of the alarm numbers 5xx.xxx … 9xx.xxx relevant in the TIA Portal are
taken into account here.
Note that the imported texts are only visible in the TIA Portal if one of the languages is selected
as the editing language for which the texts were imported.
If the SINUMERIK PLC alarm texts are re-imported, the texts in the TIA Portal are deleted or
overwritten.
Importing user alarms
9.5 Importing SINUMERIK PLC alarm texts
SINUMERIK STEP 7 Toolbox V15.1
Configuration Manual, 12/2018, A5E46279635B AA 169

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based