Siemens SINUMERIK 840D sl Configuration Manual

– You can copy the master copy to the project and overwrite duplicate blocks without
knowing which blocks have caused the conflict. In this case, select in the dialog box
"Replace existing objects and move to this location" and confirm with "OK".
The
other possibility mentioned in the dialog, "Rename and add objects", does not resolve
the conflict in this case.
Programming the PLC
4.4 Conflicts when copying blocks
SINUMERIK STEP 7 Toolbox V15.1
Configuration Manual, 12/2018, A5E46279635B AA 75

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based