Siemens SINUMERIK 880 GA2

11 Programming of Cycles 01.93
11.6 Data transfer: System memory into R parameter
@304 <Var> <Value 1> <Value 2>
The cycle machine data bytes are read into parameter <Var>.
Where:
<Value 1> Channel No. (0= own channel)
<Value 2> Byte address
@305 <Var> <Value 1> <Value 2> <Value 3>
The cycle machine data bits are read into parameter <Var>.
Where:
<Value 1> Channel No. (0= own channel)
<Value 2> Byte address
<Value 3> Bit address
@306 <Var> <Value 1>
The address of a PLC machine data is defined in <Value 1>.
Address area: 0 to 5999.
@307 <Var> <Value 1>
The byte address of a PLC machine data is defined in <Value 1>.
Address area: 6000 to 8999.
@308 <Var> <Value 1> <Value 2>
The byte address of a PLC machine data bit is defined in <Value 1>.
Address area: 6000 to 8999. The bit address (0 to 7) is in <Value 2>.
@30c <Var><Value 1><Value 2>
The compensation data can be read via part program with this command.
<Var> R parameter with value to be read in
<Value 1> Constant with data type
<Value 2> Constant with data number
Example:
@30c R10 K2 K11 The basic number (data type 2) of the 11th IKA relation
(interpolatory compensation with absolute values) is stored
in R10.
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
Main group 3/subgroup 1: Transfer setting data into R parameter
@310 <Var> <Value 1>
The address of a setting data is defined in <Value 1>.
Address area: 0 to 4999
@311 <Var> <Value 1>
The byte address of a setting data is defined in <Value 1>.
Address area: 5000 to 9999.
@312 <Var> <Value 1> <Value 2>
The byte address of a setting data bit is defined in <Value 1>.
Address area: 5000 to 9999. The bit address (0 to 7) is in <Value 2>.
11–14
© Siemens AG 1991 All Rights Reserved 6ZB5 410-0HD02
SINUMERIK 880, (PG)