Siemens SINUMERIK 880 GA2

10 Cutter Radius Compensation (CRC), Tool Nose Radius Compensation (TNRC) 05.91
10.8 M00, M01, M02 and M30 with CRC/TNRC selected
10.8 M00, M01, M02 and M30 with CRC/TNRC selected
M00, M01
x
y
S3
S2
S1
N20
N25
N30
50
50
R
R
R
R
M00, M01 with CRC/TNRC selected.
A distinction is made between two cases:
Case 1: N10 G01 F100 X0 Y0
L
F
N20 G41 X50 Y50
L
F
N25 H111 M00
L
F
N30 Y0
L
F
H and M functions are executed at point S3.
Case 2: N10 G01 F100 X0 Y0
L
F
N20 G41 X50 Y50
L
F
N25 H111 M00 Z-5
L
F
N30 Y0
L
F
H and M functions and Z movement are executed at point S1.
M02, M30
Cancellation with G40:
x
y
50
N70
N60
S
(N60)
S
(N70)
50
R
N60 X50 Y50
L
F
The compensation is withdrawn one block before the block
N70 G40 X50 Y0 M30
L
F
in which it has been cancelled with G40 (here: N60).
10–8
© Siemens AG 1991 All Rights Reserved 6ZB5 410-0HD02
SINUMERIK 880, (PG)