Siemens SIPART PS100 User Manual

2.3 Document history
The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Edition Comment
06/2023
• Section "Technical speci󹪝cations" revised
• Section "Bluetooth" revised
• Information on UKCA has been inserted
05/2021
• Changes for FW 1.03.00, HART device revision 1
• HART communication in various sections
• Explosion protection in various sections
• "Troubleshooting" section: New Info-ID 6Y (Page50)
• "Technical speci󹪝cations" section New "Explosion protection"
• "Service and maintenance" section New "Replacing electronics (Page55)" and
"Replacing a pneumatic block (Page58)"
• New section "Bluetooth (Page71)"
03/2020
• Changes for FW 1.02.00, HART device revision 1
• Changed parameter IDs
• In "QUICK START" menu: New parameter "VALVE TYPE" [06]
• In "SETUP" menu:
– For "BEHAVIORDO" [01] new function "POS"
– For "BEHAVIORDO" [01] function "NONE" changed to "ERR M"
– New parameter "DO POS LIMIT" [03]
• In "MAINT/DIAG" menu:
– The parameters "PIEZO 1" [56] and "PIEZO 2" [57] were renamed to "PILOT 1"
[04] and "PILOT 2" [05].
– New parameter "HW Version" [06]
• "Troubleshooting" section: Addition info IDs are displayed for the status of the
digital input (DI) in the "AUTO" operating mode: 6E, 6F, 6H
2.4 Product compatibility
The following table describes the compatibility between the edition of the manual, device
revision, engineering system and associated Electronic Device Description (EDD).
Manual
edition
Comments Device revision Compatible version of de‐
vice integration package
06/2023 Manual revised FW: 1.03.00 or higher
Device revision 1 or higher
EDD: 1.00.00
05/2021 New device features
03/2020 New device features FW: 1.02.00 or higher
Device revision 1 or higher
-
Introduction
2.4Product compatibility
SIPART PS100
10 Operating Instructions, 06/2023, A5E50188938-AF

Siemens SIPART PS100 Specifications

General

Brand	Siemens
Model	SIPART PS100
Category	Valve Positioners
Language	English