Siemens SIPART PS100 - Connecting a Field Device using SITRANS mobile IQ App

9. Tighten the cable gland.
1P
10.Place the lid on the positioner. Screw the lid in place.
B.2 Connecting a 󹪝eld device using the SITRANS mobile IQ app
SITRANSmobileIQ is an app for mobile devices that enables authorized service technicians to
monitor and con󹪝gure compatible 󹪝eld devices over a Bluetooth interface. You can 󹪝nd
information and the app for download at: SITRANSmobileIQ in the app store (https://
support.industry.siemens.com/cs/ww/de/sc/2067)
Requirements for establishing the 󹪝rst connection
1. Field device is in operation.
2. There is a line of sight to the 󹪝eld device.
3. You are less than 10 meters away from the 󹪝eld device.
4. LED on the SITRANSAW050 Bluetooth adapter 󹪞ashes every 2seconds.
Requirement for connection setup
1. Android: "Location" access is enabled in the mobile device.
2. SITRANSmobileIQ is authorized to access the location.
Procedure
NOTICE
Unauthorized access
It is your responsibility to prevent unauthorized access to the 󹪝eld device.
Bluetooth
B.2Connecting a 󹪝eld device using the SITRANS mobile IQ app
SIPART PS100
74 Operating Instructions, 06/2023, A5E50188938-AF