Siemens SIPART PS100 - Conformity with European Directives; Conformity with UK Directives; Product Approval and UL Compliance

3.1.3 Conformity with European directives
The CE marking on the device shows conformity with the regulations of the following European
guidelines:
Electromagnetic com‐
patibility EMC
2014/30/EU
Directive of the European Parliament and of the Council on the har‐
monization of the laws of the Member States relating to electromag‐
netic compatibility.
Atmosphère explosi‐
ble
ATEX
2014/34/EU
Directive of the European Parliament and of the Council on the har‐
monization of the laws of the Member States relating to equipment
and protective systems intended for use in potentially explosive at‐
mospheres.
2011/65/EU RoHS Directive of the European Parliament and of the Council on the restric‐
tion of the use of certain hazardous substances in electrical and elec‐
tronic equipment
The directives applied can be found in the EU declaration of conformity for the associated
device.
3.1.4 Conformity with UK directives
The UKCA marking on the device shows conformity with the following UK directives:
Electromagnetic Compatibility SI2016/1091 Electromagnetic Compatibility Directives 2016
Explosive Atmospheres SI2016/1107 Directives for Equipment and Protective Sys‐
tems Intended for use in Potentially Explosive
Atmospheres 2016
Directive on the Restriction of the Use of Cer‐
tain Hazardous Substances SI 2012/3032
Directives on the Restriction of the Use of Cer‐
tain Hazardous Substances in Electrical and
Electronic Equipment 2012
The applicable directives can be found in the UKCA declaration of conformity of the speci󹪝c
device.
3.1.5 Product approval and UL compliance
Classi󹪝cation according to
pressure equipment direc‐
tive (PED2014/68/EU)
For 󹪞uid group 1 gases; ful󹪝lls requirements according to article 4, paragraph 3 (good
engineering practice SEP)
CE conformity The applicable directives and applied standards can be found in the EU declaration of
conformity on the Internet.
UL conformity Conformity has been proven based on US and Canadian safety requirements.
For applicable safety requirements, refer to the UL CERTIFICATE OF COMPLIANCE on
the Internet at: Certi󹪝cates (http://www.siemens.com/processinstrumentation/
certi󹪝cates)
Safety notes
3.1Prerequisites for safe use
SIPART PS100
16 Operating Instructions, 06/2023, A5E50188938-AF