EasyManuals Logo

Siemens SIPART PS100 User Manual

Siemens SIPART PS100
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Connecting
5
5.1 Basic safety notes
WARNING
Lever for position detection
Danger of crushing and shearing with mounting kits which use a lever for position detection.
During commissioning and ongoing operation, severing or squeezing of limbs could occur as
a result of the lever. Risk of injury when working on control valves due to the high operating
force of the pneumatic actuator.
Do not reach into the range of motion of the lever following mounting of the positioner and
mounting kit.
WARNING
With intrinsically device version (Exi)
Risk of explosion in hazardous areas.
For intrinsically safe device versions only the certi󹪝ed circuits may be connected as auxiliary
power supply, control and signal circuits.
Make sure that the power source of the used circuits is marked as intrinsically safe.
WARNING
Unsuitable cables, cable glands and/or plugs
Risk of explosion in hazardous areas.
Use only cable glands/plugs that comply with the requirements for the relevant type of
protection.
Tighten the cable glands in accordance with the torques speci󹪝ed in Technical speci󹪝cations
(Page61).
Close unused cable inlets for the electrical connections.
When replacing cable glands, only use cable glands of the same type.
After installation, check that the cables are seated 󹪝rmly.
SIPART PS100
Operating Instructions, 06/2023, A5E50188938-AF 29

Table of Contents

Other manuals for Siemens SIPART PS100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SIPART PS100 and is the answer not in the manual?

Siemens SIPART PS100 Specifications

General IconGeneral
BrandSiemens
ModelSIPART PS100
CategoryValve Positioners
LanguageEnglish

Related product manuals