Siemens SIPART PS100 - Security Information; Security Note

2.8 Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be connected
to an enterprise network or the internet if and to the extent such a connection is necessary
and only when appropriate security measures (e.g. 󹪝rewalls and/or network segmentation)
are in place.
For additional information on industrial security measures that may be implemented, please
visit
https://www.siemens.com/industrialsecurity.
Siemens’ products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customer’s exposure
to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
https://www.siemens.com/cert.
2.9 Security note
NOTICE
Unauthorized product information or software
Use only authorized Siemens websites when accessing any product information or software,
including 󹪝rmware updates, device integration 󹪝les (EDD, for example), as well as other
product documentation. Using unauthorized product information or software could result in a
security incident, such as breach of con󹪝dentiality, or loss of integrity and availability of the
system.
For more information, see Product documentation and support (Page69).
Introduction
2.9Security note
SIPART PS100
Operating Instructions, 06/2023, A5E50188938-AF 13