③ ① ② Meaning
01 SETPOINT ##.## Displays the setpoint in mA. Status bar ① alternately displays the pa‐
rameter name or the set unit.
02 COUNTER MENU
01
• OPERATE TIME
#### Displays the number of operating hours.
02
• DIRECTN CHNG
#### Displays the number of direction changes.
03
• STROKES
#### Displays the totalized distances. A distance corresponds to a sum of
200%.
04
• PILOT 1
#### Displays the number of switching cycles of pilot valve1.
05
• PILOT 2
#### Displays the number of switching cycles of pilot valve2.
03 PEAK VALUES MENU
01
• TIME OPEN
##.# Displays the duration in seconds until the valve is open.
02
• TIME CLOSE
##.# Displays the duration in seconds until the valve is closed.
03
• ELEC TMP MIN
##.## Displays the lowest measured electronics temperature in °C.
04
• ELEC TMP MAX
##.## Displays the highest measured electronics temperature in °C.
04 RESET FACT Resets the device to the factory settings.
05 FW VERSION ##### Displays the FW version of the device.
06 HW VERSION ##### Displays the HW version of the device.
07 REPLACE ELEC WIZ Provides a step-by-step procedure to synchronize new electronics. PIN
LOCK is 2457.
Parameter assignment and addressing
8.4MAINT/DIAGS [03]
SIPART PS100
Operating Instructions, 06/2023, A5E50188938-AF 47
To Next Page
Loading...
Need help?
General
