Default Settings and Protocol-dependent Functions
When the device leaves the factory, a large number of LED indicators, binary inputs and outputs as well as
function keys are already preset. They are summarized in the following table.
D.1 LEDs 278
D.2 Binary input default settings 279
D.3 Binary output default settings 280
D.4 Function key default settings 281
D.5 Default Display 282
D.6 Pre-defined CFC Charts 283
D.7 Protocol-dependent Functions 284
D
SIPROTEC 4, 7VK61, Manual 277
C53000-G1176-C159-5, Edition 05.2018
To Next Page
Loading...
