Siemens SIPROTEC 4 7VK61 - Protocol-Dependent Functions

Protocol-dependent Functions
Protocol → IEC 60870-5-1
03
IEC 61850
Ethernet
(EN-100)
Profibus FMS Profibus DP DNP3.0 Additional
service inter-
face
(optional)
Function ↓
Operational meas-
ured values
Yes Yes Yes Yes Yes Yes
Metered values Yes Yes Yes Yes Yes Yes
Fault Recording Yes Yes Yes No. Only via
the additional
service inter-
face
No. Only via
the additional
service inter-
face
Yes
Remote protection
setting
No. Only via
the additional
service inter-
face
Yes
with DIGSI via
Ethernet
Yes
with DIGSI via
PROFIBUS
No. Only via
the additional
service inter-
face
No. Only via
the additional
service inter-
face
Yes
User-defined indica-
tions and switching
objects
Yes Yes Yes Pre-defined
“user-defined
messages” in
CFC
Pre-defined
“user-defined
messages” in
CFC
Yes
Time synchroniza-
tion
Via protocol;
DCF77/IRIG B;
Interface;
Binary input
Via protocol
(NTP);
DCF77/IRIG B;
Interface;
Binary input
Via protocol;
DCF77/IRIG B;
Interface;
Binary input
Via DCF77/IRIG
B;
Interface;
Binary input
Via protocol;
DCF77/IRIG B;
Interface;
Binary input
-
Messages with time
stamp
Yes Yes Yes No Yes Yes
Commissioning aids
Data transmission
stop
Yes Yes Yes No No Yes
Creating test
messages
Yes Yes Yes No No Yes
Physical mode Asynchronous Synchronous Asynchronous Asynchronous Asynchronous -
Transmission mode Cyclical/event Cyclical/event Cyclical/event Cyclical Cyclical/event -
Baudrate 4800 to 38400 up to 100
MBaud
up to 1,5
MBaud
up to 1,5
MBaud
2400 to 19200 2400 to
115200
Type RS232 RS 485
fiber optic
cable
Ethernet TP RS485 optical
fiber
double ring
RS485 optical
fiber
double ring
RS485 optical
fiber
RS232, RS485
D.7
Default Settings and Protocol-dependent Functions
D.7 Protocol-dependent Functions
284 SIPROTEC 4, 7VK61, Manual
C53000-G1176-C159-5, Edition 05.2018