EasyManua.ls Logo

Siemens SIPROTEC 4 7VK61 - Mechanical Tests; Climatic Stress Tests

Siemens SIPROTEC 4 7VK61
360 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Mechanical Tests
Vibration and Shock Resistance during Stationary Operation
Standards: IEC 60255-21 and IEC 60068
Oscillation
IEC 60255-21-1, Class 2
IEC 60068-2-6
Sinusoidal
10 Hz to 60 Hz: ± 0,075 mm amplitude;
60 Hz to 150 Hz: 1 g Acceleration
Frequency sweep 1 octave/min
20 cycles in 3 orthogonal axes
Shock
IEC 60255-21-2, Class 1
IEC 60068-2-27
Semi-sinusoidal
5 g acceleration, duration 11 ms,
each 3 shocks (in both directions of the 3 axes)
Seismic vibration
IEC 60255-21-3, Class 1
IEC 60068-3-3
Sinusoidal
1 Hz to 8 Hz: ± 3,5 mm amplitude (horizontal axis)
1 Hz to 8 Hz: ± 1,5 mm amplitude (vertical axis)
8 Hz to 35 Hz: 1 g acceleration (horizontal axis)
8 Hz to 35 Hz: 0,5 g acceleration (vertical axis)
Frequency sweep 1 octave/min
1 cycle in 3 orthogonal axes
Vibration and Shock Resistance during Transport
Standards:
IEC 60255-21 and IEC 60068
Oscillation
IEC 60255-21-1, Class 2
IEC 60068-2-6
Sinusoidal
5 Hz to 8 Hz: ± 7,5 mm amplitude;
8 Hz to 150 Hz: 2 g acceleration
frequency sweep 1 octave/min
20 cycles in 3 orthogonal axes
Shock
IEC 60255-21-2, Class 1
IEC 60068-2-27
Semi-sinusoidal
15 g acceleration, duration 11 ms,
each 3 shocks (in both directions of the 3 axes)
Continuous shock
IEC 60255-21-2, Class 1
IEC 60068-2-29
Semi-sinusoidal
10 g acceleration, duration 16 ms,
1000 shocks each in both directions of the 3 axes
Climatic Stress Tests
Temperatures
Standards:
IEC 60255-6
Type tested (acc. IEC 60086-2-1 and -2, Test Bd) -25 °C to +85 °C or -13 °F to +185 °F
Admissible temporary operating temperature (tested for
96 h)
-20 °C to +70 °C or -4 °F to +158 °F (legibility of display may be
restricted from +55 °C or 131 °F)
Recommended for permanent operation (according to
IEC 60255-6)
-5 °C to +55 °C or 23 °F to +131 °F
If max. half of the inputs and outputs are subjected to the max.
permissible values
Limit temperatures for storage -25 °C to +55 °C or -13 °F to +131 °F
Limit temperatures during transport -25 °C to +70 °C or -13 °F to +158 °F
Storage and transport of the device with factory packaging!
4.1.6
4.1.7
Technical Data
4.1 General
SIPROTEC 4, 7VK61, Manual 233
C53000-G1176-C159-5, Edition 05.2018

Table of Contents

Related product manuals