Functions
6-290 7SA6 Manual
C53000-G1176-C156-2
56 Initial Start Initial Start of Device
60 Reset LED Reset LED
67 Resume Resume
68 Clock SyncError Clock Synchronization Error
69 DayLightSavTime Daylight Saving Time
SynchClock Clock Synchronization
70 Settings Calc. Setting calculation is running
71 Settings Check Settings Check
72 Level-2 change Level-2 change
73 Local change Local setting change
110 Event Lost Event lost
113 Flag Lost Flag Lost
125 Chatter ON Chatter ON
126 ProtON/OFF Protection ON/OFF (via system port)
127 AR ON/OFF Auto Reclose ON/OFF (via system port)
128 TelepONoff Teleprot. ON/OFF (via system port)
140 Error Sum Alarm Error with a summary alarm
144 Error 5V Error 5V
160 Alarm Sum Event Alarm Summary Event
177 Fail Battery Failure: Battery empty
181 Error A/D-conv. Error: A/D converter
182 Alarm Clock Alarm: Real Time Clock
190 Error Board 0 Error Board 0
183 Error Board 1 Error Board 1
184 Error Board 2 Error Board 2
185 Error Board 3 Error Board 3
186 Error Board 4 Error Board 4
187 Error Board 5 Error Board 5
188 Error Board 6 Error Board 6
189 Error Board 7 Error Board 7
192 Error1A/5Awrong Error:1A/5Ajumper different from setting
193 Alarm NO calibr Alarm: NO calibration data available
194 Error neutralCT Error: Neutral CT different from MLFB
>Light on >Back Light on
HWTestMod Hardware Test Mode
4051 Telep. ON Teleprotection is switched ON
F.No. Alarm Comments
To Next Page
Loading...
Need help?
General