Control During Operation
7-257SA6 Manual
C53000-G1176-C156-2
From PC with
DIGSI
®
4
Resetting of metered values and minimum/maximum values is done for all categories
at the same time.
To reset values back to zero, first click onto the required group (energy or minimum/
maximum values) in the
MEASUREMENT submenu. Open the context menu with a right
mouseclickandselectReset.
After having entered the password N° 5 (changing parameters) the reset process is
initiated.
:
Note:
When selecting Reset, all values are reset to zero. This procedure cannot be un-
done.
To Next Page
Loading...
Need help?
General