Control During Operation
7-357SA6 Manual
C53000-G1176-C156-2
Figure 7-34 Switching setting groups from the front panel
Control of the setting groups can always be regained by switching to one of the groups
A through D provided that you know the required password.
The keycanbeusedtoreturntothe
SETTINGS sub-menu; the key can be
pressedtoreturnstothe
MAIN MENU.
From PC with
DIGSI
®
4
By opening the Online directory with a double click in DIGSI
®
4, the operating func-
tions for the device appear in the left part of the window. See Figure 7-35.
Figure 7-35 Function selection window in DIGSI
®
4 – example
Double click on Settings to find Change Group in the data window (Figure
7-35 right).
CHANGE GROUP 01/02
--------------------
0301 ACTIVE GROUP
Group A
The currently-active setting group is dis-
played under Address
301.
The setting group can be changed under Ad-
dress
302: by pressing the key, after en-
tering the password, two possible alternatives
are displayed in a new window each time:
Using the keys, select one of the alter-
natives and confirm with the key;
The next question (
“Are you sure?”)is
answered with
Yes and the selected alterna-
tive is confirmed, or is answered with
No using
the key and the change is cancelled with
the key.
ENTER
ENTER
ENTER
Are you sure?
Yes No
ENTER
0302 CHANGE to
>Group A
>Group A
Group B
Group C
Group D
via Binary Input
via Protocol
MENU
:
To Next Page
Loading...
Need help?
General