Technical Data
4.21 Breaker Control
SIPROTEC, 7SJ61, Manual
C53000-G1140-C210-1, Release date 02.2008
365
4.21 Breaker Control
Number of Controlled Switching Devices Depends on the number of binary inputs and outputs available
Interlocking Freely programmable interlocking
Messages Feedback messages; closed, open, intermediate position
Control Commands Single command / double command
Switching Command to Circuit Breaker 1-, 1½ - and 2-pole
Programmable Logic Controller PLC logic, graphic input tool
Local Control Control via menu control
assignment of function keys
Remote Control Using Communication Interfaces
Using a substation automation and control system (e.g. SICAM)
Using DIGSI (e.g. via Modem)
To Next Page
Loading...
