8 Power supply system SITOP PSU8600 redundant
Integration of a SITOP 24V power supply in PCS 7
Entry ID: 10948108, V3.2, 01/2019
Siemens AG
2019 All rights reserved
If you need message texts in several languages, you use the menu command
Manager to change the language for display texts and adapt the text in the
message configuration for the set language.
The messages of the SITOP PSU8600 power supply have already been
parameterized in the function block and you do not need to change them.
However, if required you can adapt the message texts.
Figure 8-11:
To Next Page
Loading...
