Integration of a SITOP 24V power supply in PCS 7
Entry ID: 10948108, V3.2, 01/2019
When monitoring via Industrial Ethernet/PROFINET, the uninterruptible power
supply has its own block icon with faceplate. By installing the SITOP library, the
necessary components are copied to your system. Below, we will give you a brief
description displays on the Operator Station.
Block icon
You can see the following information in this symbol:
• Battery charge status
• Active message
• Saved note
Figure 9-8
Faceplate
The faceplate for the UPS1600 makes available the following views:
• Standard view
• Alarm view
• Trend view
• Note view
• Batch view (not described)
To Next Page
Loading...
