BACnet Communications
3.3 BACnet Alarms
F US Clamp-on Communications Protocol Manual
34 Hardware Installation Manual, 11/2015, A5E34981613-AC
The BACnet Alarms can be read by using the FieldServer Toolbox.
1. At your desktop, click and open the FieldServer Toolbox.
2. Click on the [Connect] button.
3. Click on [Diagnostics & Debugging] and the menu will open.
4. Navigate - Scroll down to [View] and then click [Data Arrays].
5. Scroll to [C1_BI_01] and click to open.
To Next Page
Loading...
