Connecting
5.2 Wiring the power supply and the output
SITRANS FUS080 transmitter
Operating Instructions, 07/2012, A5E03059912-02
27
1. Wire battery (battery-powered versions only).
Figure 5-3 Wiring the battery
2. Connect power supply to L1, N and protective earth (PE) (mains-powered versions only).
Figure 5-4 Power supply and output connection
NOTICE
Cable straps
It is recommended to use cable straps.
3. Fix power supply cable to terminal housing with clamp (mains-powered versions only).
To Next Page
Loading...
