SITRANS FUS080 transmitter
Operating Instructions, 07/2012, A5E03059912-02
29
Commissioning
6
Commissioning the device includes the following steps:
1. Resetting the battery lifetime ("Start-up routine" (Page 31)).
2. Configuring the dev
ice via SIMATIC PDM ("Commissioning via PDM" (Page 32)).
Before comm
issioning, a basic guide to the local display and the menu structure is offered in
the chapters:
"Operating the local display"
"Navigating the menu structure"
6.1 Operating the local display
The local display is divided into 3 areas:
● Top area with symbols for status information
● Mid area with actual readings
● Lower area with index number of the shown menu
Activate the push button to go the next index menu and related information.
Operating the local display
Table 6- 1 Information symbols
Symbol Description
Mains power supply connected
Battery charge status
Warning
To Next Page
Loading...
