Siemens SITRANS FUS080 - Page 74

Parameter lists
A.2 Output
SITRANS FUS080 transmitter
72 Operating Instructions, 07/2012, A5E03059912-02
Modbus
Address
Parameter Default
value
Value range Access
level
Description
40824 442 Pulse B direction Reverse Forward,
Reverse,
Forward net,
Reverse net.
R/W Pulse output calculation on pure
forward flow or pure reverse flow -
or net flow for forward and reverse
pulse flow.
Valid if pulse output B is enabled
and pulse function selected
40825 443 Amount per pulse B 1.000000
(m
3
)
0.000001 ...
1000000000
R/W Volume per pulse.
Valid if pulse output B is enabled
and pulse function selected
40827 444 Pulse width for pulse B 5 ms 5, 10, 20, 50,
100, 200, 500
ms
R/W Pulse length when the pulse is
active.
Valid if pulse output B is enabled
and pulse function selected
Communication
For editing the communication settings, use PDM device menu "Communication Setting"
40833 591 Device Communication
Address
1 1 ... 247 Read Meter has default address value 1
with selectable address up to 247
40834 592 Baudrate 4 0 ... 5 Read Communication port speed
40835 593 Parity 0 0 ... 3 Read Communication port parity
40836 594 Interframe space 35 35 ... 255 Read Minimum space between two
messages (bytes x 10)
40837 595 Response delay 5 1 ... 50 Read Minimum time from receiving a
request to its response
Data logger
40619 600 Log interval Monthly Daily, Weekly,
Monthly
R/W Log interval
40620 601 Day of week, if weekly log Sunday Monday to
Sunday
R/W When log interval is set to weekly
logging, this parameter defines what
weekday the logging is performed.
Valid if weekly log interval is
activated
40621 602 Limit for too high
consumption
1E+09 -3.4E+38 ...
+3.4E+38
R/W Limit for too low consumption during
current log interval. Based on
totalizer 1 and the selected unit
40623 603 Limit for too low
consumption
No -3.4E+38 ...
+3.4E+38
R/W Limit for too low consumption during
current log interval. Based on
totalizer 1 and the selected unit
22 604 Reset log No, Yes HW
key
Reset data logger
Periodic log Totalizer 1
40770 160 Next settling date 01-01-
2000
dd-mm-yyyy R/W Next settling date where actual
value of totalizer 1 is stored
40773 161 Latest settling date 01-01-
2000
dd-mm-yyyy Read Latest settling date where value of
totalizer 1 was stored
40776 162 Latest totalizer 1 value 0 Read Latest stored value of totalizer 1