Accessories
SIWAREX FTA
Description Order No.
with screw contacts - see next point
• Shielding contact rail
sufficient for a SIWAREX FTA assembly
6ES7 390-5AA00-0AA0
• Shielding connection clamp
Content: 2 pieces (suitable for cable of diameter 4 to 13 mm)
Note:
One shielding connection clamp is required for each of the following:
- Scale connection
- RS 485 interface
- RS 232 interface
6ES7 390-5CA00-0AA0
• S7 profile rail
- 160 mm 6ES7 390-1AB60-0AA0
- 480 mm 6ES7 390-1AE80-0AA0
- 530 mm 6ES7 390-1AF30-0AA0
- 830 mm 6ES7 390-1AJ30-0AA0
- 2.000 mm 6ES7 390-1BC00-0AA0
Power supply PS 307
(only required if no DC 24 V is available)
AC 120/230 V; DC 24 V
• PS 307-1B; 2 A
6ES7 307-1BA00-0AA0
• PS 307-1E; 5 A
6ES7 307-1EA00-0AA0
• PS 307-1K; 10 A
6ES7 307-1KA00-0AA0
Label strips (10 pieces, replacements) 6ES7 392-2XX00-0AA0
Remote display (optional)
The digital remote display model Siebert S 102 can be connected directly
through an RS 485 interface to the SIWAREX FTA
Siebert Industrieelektronik GmbH
Box 1180
D-66565 Eppelborn
Tel.: 06806/980-0
Fax: 06806/980-999
Internet: http://www.siebert.de
For detailed information, please contact the manufacturer.
Connection and distribution box SIWAREX JB
for parallel switching for load cells, optional
7MH4710-1BA
Expansion box SIWAREX EB
for extending load cell cables, optional
7MH4710-2AA
Micro Memory Card (SIMATIC), optional 7MH4900-2AY21
Calibration set – Accessories for a calibration certification (sticker plate,
calibration marks, CD with samples and information)
7MH4900-2AY10
Ex-Interface, Type SIWAREX IS with ATEX certification for intrinsically safe
connection of load cells, including the manual
• • with short-circuit current < DC 199 mA
7MH4710-5BA
• • with short-circuit current < DC 137 mA
7MH4710-5CA
Cables (optional)
To Next Page
Loading...
