Fire Safety & Security Products
Building Technologies
1583_o_en_−−_5
98
08.2005
5.18 Programming 6. LON devices
to define basic functions and alarm organization
to define the conventional lines (only if K3M010 or K3M020 is equipped)
to overwrite the 4 basic passwords
to define the addressable lines / logical detector zones and conTrol zones
for data transfer FC330A PC (see page 70)
to define the floor repeater and control panels
to define the application on the serial ports
to define programmable inputs on K3X0x0 / K6
CONFIGURATION: 1. system data
(4.4.1) 2. collective line
3. password
4. addressable line
5. SWE330A
6. LON devices
7. serial ports
8. K6 inputs
Functions as displayed Selectable options/Remarks
LON: 1. SELECT LON device number – to select a specific device number
– only device addresses 1...16 are valid
(4.4.1.6) 2. ADD LON device – to add a new device
3. DELETE LON device – to remove a LON device
4. CONFIGURE LON device – to select device type
– enter 1 to open device selection box
– possible device types
B3Q580 floor repeater panel max. 16 possible
B3Q59x floor repeater & control panel max. 16
K3I050 converter card LON/synoptic max. 16
K3I110 LON/input/output max. 16
– related to selected device under step 1
5. LINK LON inputs only possible with configuration tool SWE...
Note: Other parameters than device types can only be programmed via configuration tool SWE330A
More details regarding LON-bus see document e1923
To Next Page
Loading...
