Fire Safety & Security Products
Building Technologies
1583_o_en_−−_5
97
08.2005
5.17 Setting 3. password
to define basic functions and alarm organization
to define the conventional lines (only if K3M010 or K3M020 is equipped)
to overwrite the 4 basic passwords
to define the addressable lines / logical detector zones and conTrol zones
for data transfer FC330A PC (see page 70)
to define the floor repeater and control panels
to define the application on the serial ports
to define programmable inputs on K3X0x0 / K6
CONFIGURATION: 1. system data
(4.4.1) 2. collective line
3. password
4. addressable line
5. SWE330A
6. LON devices
7. serial ports
8. K6 inputs
PASSWORDS: 1. configuration Default password = 8642
(4.4.1.3) 2. user text editing Default password = 0011
3. service functions Default password = 0033
4. user operating Default password = 0055
Enter xxxx + ’ok’
Timeout for operating access via password:
− 1 min. during password input
− 5 min. within menu operation
Note: Details on password see ’operating access’ page 60
To Next Page
Loading...
