Functional Description
AP05
Date: 22.08.2022 Art. No. 90885 Mod. status 108/22 Page 20 of 50
All error memories and error counters are deleted when the factory settings are restored
(see chapter 3.5.3).
3.5.2.2 Presentation
In presentation mode, specific parameters and a fixed set point (850) are set and validated.
So, the mode of operation of the device can be presented without the need of specifying a set
point via an interface. As soon as the device is restarted or process data are exchanged with
an IO-Link master, the presentation is finished.
3.5.3 Restore factory settings
There are various options for restoring the factory settings of the device:
Table 16: Access to factory settings
3.5.4 Operation hours counter
Various operating hours counters are in operation in the AP05.
3.5.4.1 General operating hours counter
Detects the time during which the device is sufficiently supplied via the connection line and
is therefore in operation. Operating mode and state are irrelevant. This counter cannot be
deleted or reset.
General characteristics
To Next Page
Loading...
Need help?
General
