Siko AP05 User Manual

Functional Description
AP05 Date: 22.08.2022 Art. No. 90885 Mod. status 108/22 Page 21 of 50
Display
Menu
ro \ Ott\
Delete

3.5.4.2 Customer-specific operating hours counter
Detects the time during which the device is sufficiently supplied via the connection line and
is therefore in operation. Operating mode and state are irrelevant. This counter can be deleted
or set to 0 by the user.
Resolution: 1h, memory accuracy 10 min, display in the ReadOnly menu, can be deleted via
"CODE 50000" and reset to factory settings.
EEPROM
yes
Unit
Hours
Value range
0 … 87600 (10 years)
Memory accuracy
10 min
IO-Link
Data type
-
Access
-
Index
-
-
-
Data Storage

Display
Menu
ro \ Ott\
Delete
chPAr\OPtIO\COD5
3.6 Warnings / Errors
3.6.1 Warnings
Warnings have no influence on the recording of the actual value.
Warnings are deleted after removing the cause.
The cause of the error can be determined based on the error code (see chapter 5.5).
Possible warnings:
• Battery voltage for absolute position detection is below limit  immediately exchange
battery!
This warning is displayed with a blinking battery symbol. Warning messages are output via
the interface via an IO-Link event and the StatusWord (see chapter 3.5.1, chapter 5.1.1.2
and chapter 5.5).

Siko AP05 Specifications

General

Brand	Siko
Model	AP05
Category	Measuring Instruments
Language	English