To insert the battery you must follow
these steps:
• Open the door of the side with the
battery you wish to insert.
• Push the handle down >>> Fig. 128.
• Push the battery into the housing
intended to this end >>> Fig. 127.
The unblocking lever will return to its
position, immobilising the battery.
Fig. 127 - Inserting the battery.
Fig. 128 - Pushing the handle in.
If you remove the battery while the vehicle
is turned on, the following informational
warnings will appear on the instrument
dashboard:
Make sure that the battery is entirely
secured in place.
Once the battery has been correctly
connected, the message on the instrument
dashboard will disappear. You may need to
restart the vehicle.
CAUTION
CAUTION
Battery failure
Battery unblocked
Ensure that you do NOT insert the battery
pack when the vehicle is charging nor when
it is turned on.
Failure to follow this instruction can
damage the vehicle’s electronics.
CAUTION
88 Use
MU_S04 MY23_EN - USER MANUAL S04 MY23 (V002)
To Next Page
Loading...
Need help?
General