Silicon Graphics UV 2000 User Manual

007-5832-002 79
Appendix A
A. Technical Specifications and Pinouts
This appendix contains technical specification information about your system, as follows:
• “System-level Specifications” on page 79
• “Physical Specifications” on page 80
• “Environmental Specifications” on page 81
• “Power Specifications” on page 82
• “I/O Port Specifications” on page 83
System-level Specifications
Table A-1 summarizes the SGI UV 2000 system configuration ranges. Note that while each
compute/memory blade holds two processor sockets (one per node board); each socket can
support four, six, or eight processor “cores”.
Table A-1 SGI UV 2000 System Configuration Ranges
Category Minimum Maximum
Processors 32 processor cores (2 blades)
a
a. Dual-node blades support eight to 16 cores per blade.
2,048 processor cores (per SSI)
Individual Rack Units (IRUs) 1 per rack 4 per rack
Blades per IRU 2 per IRU 8 per IRU
Compute/memory blade DIMM
capacity
8 DIMMs per blade 16 DIMMs per blade
CMC units 1 per IRU 1 per IRU
Number of baseIO riser enabled
blades
One per SSI One per SSI

Silicon Graphics UV 2000 Specifications

General

Brand	Silicon Graphics
Model	UV 2000
Category	Server
Language	English