9 GB
Regularly check the power plug
and the power cord for damages.
If the power cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
Protect the power cord against
damages. Do not let it hang over
sharp edges, do not squeeze or
bend it. Keep the power cord
away from hot surfaces and open
flames.
Operation
The product must not be left
unattended while it is connected
to the supply mains.
Do not move the product while it
is in operation.
Do not use the product without an
inserted set of plates.
Do not place the product on hot
plates (gas, electric, coal cooking
range etc.). Operate the product
on a level, stable, clean, heat-
resistant and dry surface.
Do not cover the product while it
is in use or shortly after use, when
it is still hot.
Make sure that the power cord
is not pinched by the plates or
touches the rim of the plates.
The use of extension cords is not
recommended. If the use of an
extension cord is necessary, it
must be designed for a current
flow of at least 10 A.
Lay cords in such a way that
they may not be tripped over or
otherwise damaged.
The product is not intended to
be operated by means of an
external timer or separate remote-
control system.
Cleaning and storage
m WARNING! Risk of injury!
Disconnect the product from the
power supply before cleaning
work and when not in use.
Do not store the hot product in a
cupboard or in the packaging.
To Next Page
Loading...
Need help?
General
