6.1 Start screen after first connection
After installation and first connection you should see a screen similar to the one
shown below.
After the first power-on there are no batteries and tanks defined and Pico only
shows a barograph screen. Please long press button to enter the settings menu.
6.2 Language settings
You can change the device’s language by navigating to GENERAL SETTINGS
LANGUAGE. You can choose between English and German language. More
languages will be added with future firmware upgrades.
6.3 Units
You can change units by navigating to GENERAL SETTINGS UNITS. There,
you can select your preferred units for pressure, temperature, tank volume and
altitude.
To Next Page
Loading...
