You can find the serial number on the sticker on the back side of PICO or in the
menu under SYSTEM SYSTEM INFO.
This is default SSID and you can change it.
8.4.5 TCP IP
Shows the default IP of PICO.
8.4.6 TCP PORT
Shows the default TCP port for communicating with PICO.
8.4.7 UDP IP
Shows the default IP to which UDP live data packets are sent.
8.4.8 UDP PORT
Shows the default UDP port for communicating with PICO.
8.4.9 PASSWORD
Default password: pico<first four digits of serial number>
Example: if your PICO’s serial number is 12345678, then the default Wi-Fi
password is pico1234.
You can find the serial number on the sticker on the back side of PICO or in the
menu under SYSTEM SYSTEM INFO.
This is default password and you can change it.
You cannot see current password in the menu, but you can change it by selecting
the PASSWORD setting. Minimum password length is 8 characters.
8.4.10 WI-FI RESET
Should you wish to reset the Wi-Fi settings to default values, you can do so by
selecting this option. New (default) Wi-Fi SSID and password are displayed on the
screen. Please memorize the SSID and password so that you will be able to connect
to PICO after Wi-Fi reset.
8.5 DATE & TIME
In this menu, you can set the time, date, and time zone manually, but we do not
recommend to do it, because these values will be overridden by your smart phone
settings each time you connect the phone to your PICO and start Pico application.
The exact time is important for the proper functioning of the device and hence it is
synchronized with your phone on each connection.
To Next Page
Loading...
Need help?
General
