1 Introduction
Congratulations on your purchase of the Simarine PICO Battery Monitor. Simarine
developed a state of the art DC Battery monitor.
Simarine’s PICO is a water and dust resistant device used to monitor DC power
sources as batteries and solar panels. The information is displayed on a large 3,5”
high resolution IPS display with Gorilla Glass and anti-reflective coating to ensure
superior visibility.
PICO is capable of monitoring up to 6 batteries, 14 tanks, 14 temperatures and 20
independent current sensors (Shunts).
PICOone is capable of monitoring up to 2 batteries, 2 tanks, 2 temperatures and 20
independent current sensors (Shunts).
PICO and PICOone are equipped with a Wi-Fi module to communicate with the
PICO application available for Android and iPhone smartphones. The application
allows accessing live data, analyzing history data, configuring PICO and perform a
firmware upgrade of PICO.
2 Accessories
SC300 Digital Shunt – SIMARINE High Precision 300A Shunt
SC500 Digital Shunt – SIMARINE High Precision 500A Shunt
SC302T Digital Shunt – SIMARINE High Precision 300A Shunt with 2
resistance inputs for tank level measurement and 2 voltage inputs for measuring
voltages of two batteries.
SCQ25 Quadro Digital Shunt Module – SIMARINE High Precision 4x25A
Shunt
SCQ25T Quadro Digital Shunt and Tank Module – SIMARINE High Precision
4x25A Shunt and Tank Interface Module with 4 resistance and 3 voltage inputs.
ST107 Digital tank interface module with 4 resistance and 3 voltage Inputs
3 Safety
Installation of Simarine electronics should be made by electrical specialists with
proper safety equipment. When working with batteries you should wear protective
clothing and eye protection.
To Next Page
Loading...
Need help?
General
