8.3.1.5 AMMETERS
Current sensor (shunt) which is connected to the battery. You can only select
current sensors that are not already used by other device’s configuration.
For a battery configuration without a shunt, leave current sensor empty.
8.3.1.6 TEMPERATURE SENSORS
Temperature sensor which is connected to the battery. You can only select sensors
that are not already used by other device’s configuration.
8.3.2 TANKS
This is the list of the tanks which you have added to your PICO. By selecting a
certain tank, you can view or change its settings, and you can delete the tank if you
need to. By selecting “Add new”, you can add a new tank.
8.3.2.1 NAME
Here, you can view or edit the tank name.
8.3.2.2 TYPE
Here, you can view or change the tank type. You can choose between WATER,
FUEL and WASTE WATER. Tank type is used solely for the color that will
represent the tank on PICO’s screen. Each type has a different color.
To Next Page
Loading...
Need help?
General
