CP42/50/52 Waypoint/route menus Chapter 5
52
5.1.1 Delete waypoints via menu
MENU
Call up the menu bar, and…
3,1
load WP list
+/-
Select waypoint you wish to delete
ENT
Press
[ENT]
to open for editing
WIN
Press [WIN] to delete waypoint
CLR
Confirm entry and return to WP list
) Edit waypoints directly on the chart via info windows. Refer to
section 3.3.3.
5.2 Routes stored in the memory
The route list will keep a record of all the saved routes in the system.
It will provide information on number of waypoints in the route, etc.
Existing routes can be altered via the route list – see further on in this
chapter, or directly on the chart via info windows – refer to sections
3.3.4 and 3.3.5. To delete a route – refer to section 5.2.1.
) Making new routes can be done directly on the chart with the PLOT
function – refer to section 3.3.9, or from the WP list using existing
waypoints – refer to section 5.2.2.
MENU
Call up the menu bar, and…
3,2
load route list
+/-
Toggle through the stored routes with the +/- keys, or…
A-Z
Select route by entering its name (existing route)
Move cursor up/down to select a specific route
ENT
Call up the route details on highlighted route – see next page.
To Next Page
Loading...
Need help?
General
