Simrad CP50 - Turn NAV off; Waypoint Advance; Restart to Approaching Point

CP42/50/52 NAV menus & navigation examples Chapter 6
69
6.2.2 Navigation setup
If you wish to make any changes in the navigation setup, you can
quickly enter the navigation setup display by pressing
[ENT]
from the
highway display (graphical steering display).
ENT
Quick access to navigation setup from active highway display, or…
-refer to display example and description of functions in section 6.1.1.
6.2.3 NAV mode – Turn NAV off
MENU
Call up the menu bar, and…
4,2
turn off navigation mode
6.2.4 NAV mode – Waypoint advance
½
MENU
Call up the menu bar, and…
4,3
activate shift to next waypoint
- it will require that navigation mode is active and that “anext
waypoint” exists.
6.2.5 NAV mode – Restart to approaching point
½
MENU
Call up the menu bar, and…
4,4
activate restart to approaching point
- if you for some reason have drifted off course and wish to restart
navigation from your actual position to the approaching point.