CP42/50/52 NAV menus & navigation examples Chapter 6
80
suggested).
This will activate the pop-up window “Navigate in track” - now follow
the procedure from the ) a few lines further ahead.
From the menu:
MENU
Call up the menu bar, and…
4,4
select Track navigation
) This will activate the pop-up window “Navigate in track” from
where you can choose which track you wish to select for navigation:
+/-
Scroll up/down in the track list until the correct track number / name
appears
Use the cursor to move around in the window if anything needs to be
changed – such as Direction in track, etc.
0-9
Key in the number of the first trackpoint you wish to sail to
Navigate in track:
Track: TRACK 1 0001
Trackpoint: 00001
Bearing: 224° Distance: 0.000nm
Direction in track: FORWARD
XTE alarm: 00.10 OFF
Auto trackpoint shift: WP-circle
Navigation mode: RHUMBLINE
Beep at trackpoint shift: OFF
ENT
Start navigation
A course line will now be drawn from ship’s position to the first point
of destination.
It is possible to mix and match the data you require to have on the
To Next Page
Loading...
Need help?
General
