Singer EM9305 - Unpacking and Power Connection

12
3
2:2
UNPACKING
1. Placethemachineonasturdy,atsurfaceandremovethe
packaging.
2. Removethepackingmaterial.
3. Themachineisdeliveredwithanaccessorybaganda
powercord.
4. Wipe the machine, particularly around the needle and stitch
platetoremoveanyoilbeforeembroidering.
Note: Your SINGER
®
EM9305 embroidery machine is adjusted
to provide the best stitch result at normal room temperature.
Extreme hot and cold temperatures can affect the result.
CONNECT THE POWER CORD
Ontheundersideofthemachineyouwillndinformation
aboutthepowersupplyvoltage(V)andthefrequency(Hz).
1. Connectthepowercordtotherearsocketonthebottom
rightsideofthemachine(1).
2. Press the ON/OFFswitchto“ION”toturnonpowerand
light(2).
Note: The middle socket (3) can be used for a foot control of
type FR5 (not included with the machine).
For the USA and Canada
This machine has a polarized plug (one blade wider than
the other). To reduce the risk of electric shock, this plug
is intended to t in a polarized outlet only one way. If the
plug does not t fully in the outlet, reverse the plug. If
it still does not t, contact a qualied electrician to install
the proper outlet. Do not modify the plug in any way.